GENERAL SPECIFICATIONS
- Standard :
Singapore Standard SS245: 2014, MS 1390: 2010 similar to British Standard BS 7491 Part 3:1994 and BS EN 13280:2001 - Materials :
Sheet Moulding Compound (SMC) consists of :
Resin – Isophthalic unsaturated polyester resin conforming to BS 3532 specification
Fiber Glass – Low alkali fiberglass conforming to JIS R3411 to R3417 or BS 3396, BS 3496, and BS 3749 specifications - Manufacturing Process :
Hot pressed SMC compression molding - Tank Structural Support :
Tie-rod System:
External:
Hot Dipped Galvanized Steel
Internal:
SS304 Tie-rod, Optional SS316
Roof Support: PVC/ABS pipes with GRP roof panel stiffener - External Braced System :
External:
Hot Dipped Galvanized Steel
Internal
None (metal free inside, non-partitioned tank only)
Roof Support: PVC Poles with GRP roof panel stiffener - *Note: Specification may vary according to the client’s requirement.
- Ladder :
Internal ladder shall be made of SS304/316 and aluminum for external ladder, 300mm width - Skid Base:
As per Pipeco design
Standard Thickness for 1.22m x 1.22m Tank Panel
Type | 1.22m (H) | 2.44m (H) | 3.66m (H) | 4.88m (H) |
Tank covers | 1.5mm | 1.5mm | 1.5mm | 1.5mm |
Tank covers | 2.5mm | |||
3rd side panels | 2.5mm | 2.5mm | ||
2nd side panels | 2.5mm | 3.0mm | 3.0mm | |
1st side panels | 2.5mm | 2.5mm | 4.0mm | 4.0mm |
Bottom panels | 2.5mm | 2.5mm | 4.0mm | 4.0mm |
Standard Thickness for 1.0m x 1.0m Tank Panel
Type | 1.0m (H) | 1.5m (H) | 2.0m (H) | 2.5m (H) | 3.0m (H) | 3.5m (H) | 4.0m (H) |
Tank covers | 1.5mm | 1.5mm | 1.5mm | 1.5mm | 1.5mm | 1.5mm | 1.5mm |
4th side panels | 2.5mm | 2mm(1×1.5m) | 2mm(1x2m) | ||||
3rd side panels | 2mm(1×1.5m) | 2mm(1×1.5m) | |||||
2nd side panels | 2mm(1×1.5m) | 2mm(1x2m) | 2.5mm | 3.0mm | |||
1st side panels | 2.0mm | 2mm(1×1.5m) | 2mm(1x2m) | 2.5mm | 2.5mm | 3.0mm | 4.0mm |
Bottom panels | 2.0mm | 2.0mm | 2.0mm | 2.5mm | 3.0mm | 4.0mm | 4.0mm |
Get a Quote
For your requirements!
Mail us to info@pipecotanksa.com or call us at +966 50 011 5651